DUAL SENSING SMART START BATTERY ISOLATOR 12V 100A
KWD 59.000
The REDARC Smart Start SBI12D 100A dual battery isolator enables the user to charge a 12 volt start battery from a solar panel or battery charger on the auxiliary battery.
In stock
Description
The REDARC Smart Start® SBI12D is a microprocessor controlled battery isolator used in a dual battery system. It is designed to be used in dual battery systems as a solenoid priority system to protect the start battery from excessive discharge. The SBI12D provides 12 volt DC incorporating 100A of continuous ratings.
DUAL SENSING
The dual sensing model is used to isolate the start and auxiliary batteries in a system where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The SBI12D also allows the start battery to be charged by the external source once the auxiliary battery reaches 13.2 volts. This is useful to top up the start battery.
POWER SAVING TECHNOLOGY
The Smart Start SBI12D incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.
Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a high quality fuse kit.
FEATURES
- Overmould design
- Compact in size and easy to install
- Silver contacts for longer life and suitable for marine applications
- Power saving technology
- Fault indication
- Fully surge protected
| gtin_barcode | 9338628001330 |
|---|---|
| brand | REDARC |
| Max. Inrush Current | 400A |
| Max. Continous Current | 100A |
| Turn On Voltage | 13.2V |
| Turn Off Voltage | 12.7V |
| Turn On Delay | 5 seconds |
| Turn Off Delay | 10 seconds |
| Standby Current | <5mA |
| Weight | 200 g |
| height | 70 mm |
| width | 75 mm |
| depth | length | 80 mm |
| Warranty | 2 Years |
| System Voltage | 12V |
| Output Voltage | 12V DC |
| Input Fuse Rating | 100A |
| Output Fuse Rating | 100A |
Additional information
| Brand |
|---|
Only logged in customers who have purchased this product may leave a review.
Related Products
12V DUAL BATTERY MONITOR
SMART START SBI 12V 100A
THE MANAGER30
180W MONOCRYSTALLINE SOLAR PANEL
100AH LITHIUM DEEP CYCLE BATTERY
JIMNY 2018+ cruise control
120W PORTABLE SOLAR PANEL KIT
DUAL BATTERY MONITOR
ANDERSON CIGARETTE FLUSH MOUNT
ANDERSON STYLE DUST CAP
2000W PURE SINE WAVE INVERTER
BCDC UNIVERSAL MOUNTING BRACKET
ALPHA150 BATTERY TRAY
PORTABLE BATTERY BOX
115W SOLAR BLANKET SUNPOWER CELLS
120W MONOCRYSTALLINE SOLAR PANEL
PRIME REDVISION SYSTEM
Dometic PerfectBattery BR 12
BCDC Alpha25 12V 25A DC Battery Charger
Dometic Sine Power Inverter 3500W
Dometic DC Hardwiring Kit
600W DOMETIC SINE WAVE INVERTER
200W MONOCRYSTALLINE SOLAR PANEL
WATER TANK SENSOR KIT
SOLAR REMOTE MONITOR
275 AMP BATTERY MANAGER
ROOF LIGHT WIRING CONCEALER
5M ANDERSON TO ANDERSON CABLE
Hall Effect Current Sensor
lc71 / lc76 / lc78 / lc79 cruise control
Smart Battery Monitor
1500W DOMETIC SINE WAVE INVERTER
40A FUSE KIT
140 AMP DUAL BATTERY MANAGER
BCDC Alpha50 12V 50A DC Battery Charger
BCDC CORE IN-CABIN 25A DC BATTERY CHARGER
60A FUSE KIT
TVMS ROGUE WITH REDVISION DISPLAY
1000W DOMETIC SINE WAVE INVERTER
SINGLE ANDERSON STYLE FLUSH MOUNT
ALPHA150 12V 150AH LITHIUM BATTERY LiFePO4
Dometic PerfectPower DCC 1212-40
2000W DOMETIC SINE WAVE INVERTER
Manager Alpha50 with RedVision
1.5M ANDERSON TO BATTERY CLIP CABLE
TWIN ANDERSON STYLE FLUSH MOUNT
Dometic PerfectCharge MCP 1207
Dometic PLB15 Portable Battery
Fridge Cable – Dometic to Open End
Dometic Büttner MT PRO7
20 AMP SOLAR REGULATOR
ANDERSON PLUG T-HANDLE – GREY
DOMETIC PLB40
200W PORTABLE SOLAR PANEL KIT
Reviews
There are no reviews yet.